Nowadays, many owners' houses are retested houses. Duplex stairs are indispensable. Everyone knows that they should pay attention to moisture, smashing and anti-wear during use, but what should they do? Many people are not very good. To understanding. The following small series introduces you to the common maintenance methods of the double staircase.
Part1: Stair moisture protection must be careful to avoid moisture attack
The moisture-proof of the stairs is an important part of the maintenance of the stairs. Whether it is a wooden staircase or a metal staircase, the pedals, handrails, accessories and other locations need to be protected from moisture. If the moisture-proof work is not done well, not only the wood is prone to mildew, but also the metal fittings may rust, which affects the overall structure and function of the stairs.
The dampness of the stairs is a major event, especially the wooden stairs are more susceptible to moisture in the humid environment, resulting in deformation, cracking, cornering, and falling off of the wooden components of the stairs. Therefore, for stair wood products, we must take measures to prevent moisture.
Response: It is necessary to paint frequently
In wet environments, treads, handrails, etc., which are often in contact with people, are more susceptible to mildew and softness relative to other places on the wooden staircase. Therefore, a layer of cured wear-resistant paint can be applied to the treads, handrails, etc. to reduce the degree of local wear and damage, and also to reduce the moisture level of the stairs in a humid environment. At the same time, if the stairs are inadvertently touched with water, they should be wiped dry immediately to prevent the water from seeping into the board.
Maintenance tips: cleanliness should be carefully selected
In daily life, clean stairs must not be scrubbed with a lot of water. Some people feel that if the stairs are easy to dirty, they often scrub the stairs with water, which makes it easy for the stairs to get wet. It is generally recommended to clean once a week, just use a clean broom to clean the surface dust interface, if there are stains can be sprayed on the surface with a cleaning agent and then scrub with a soft cloth.
In wet weather, some hygroscopic agents such as moisture absorbent and charcoal can be placed around the wooden stairs to help alleviate the moisture of the wooden stairs. In addition, when cleaning stairs in wet weather, use a vacuum cleaner to clean it. Use a dry cloth to dry the pedals and the surface of the handrail.
Part2: Wooden stairs must be protected against insects and safe.
In wet weather, wooden stairs are prone to insect problems. When choosing a wooden staircase, the home must pay more attention to its pest control problem. Do not solve it when the insects are serious or even affect the structure. It must be prevented before it happens.
The pinhole size insect eye may appear after the wooden stairs have been used for a certain period of time. And after a while, new insect eyes will appear, and the sawdust drilled out of the insects will have wood chips floating out. These conditions mean that the stairs are already showing signs of insects. If you don't pay more attention, the whole staircase structure may be infected with insects and cause danger.
Response measures: camphor peppers are useful
If you find a wormhole on the stairs, you can use a camphor or pepper to grind it, then sprinkle it near the eye of the insect, so as to avoid new insect eyes. Or you can choose a professional insect repellent, and put insecticide on the hidden position of the stairs, which can effectively prevent the stairs from being wormed.
Maintenance tips: ventilation and drying is the key
If you want to better avoid stair bugs, you usually need to apply a layer of anti-mite paint when installing wooden stairs. This is a more useful method. In addition, in the usual maintenance of stairs, in addition to the necessary cleaning, it is necessary to pay attention to the ventilation and drying of the room, so that the stairs "breath" the fresh air, so as to effectively prevent the stairs from being wormed.
In the spring, in the wet weather or the breeding season, you can spray some insecticide on the stairs, or place some mothballs in the corners of the stairs to prevent the insects from breeding in the wooden stairs.
Part3: Stairs should also be protected against wear and bright appearance.
Tread plates, handrails, etc., which are often in contact with people, are relatively easy to wear relative to other components. In order to avoid local severe wear after the wooden treads are used for a period of time, these parts should pay more attention to anti-wear measures.
The treads and handrails of the wooden stairs are the parts that are often in contact with people, because the wear of the contact is inevitable, so the life of the other members of the stairs is short. Unremedial damage can occur if there is a lack of care.
Countermeasures: waxing maintenance is the most important
For handrails, pedals, etc., regular wax or floor wax should be applied regularly. In addition, although the paint surface on some tread plates is a light-curing wear-resistant paint, the wear resistance is relatively speaking, and it has a certain service life in itself, so you must pay attention to the degree of wear of the tread plate. Generally, do not wear high heels to walk the stairs, choose soft slippers, etc., which can effectively avoid wear.
Maintenance tips: lay a carpet to protect
In order to avoid local severe wear after the wooden treads have been used for a period of time, a carpet can be laid on the center of the stairway. This not only protects the stairs, but also embodies the entire space to some extent.
Long-term exposure of wooden stairs to strong sunlight, or rapid rise and fall of temperature in the room may cause premature aging of the tread paint surface. Therefore, maintaining the indoor temperature and humidity is a necessary measure to protect the stairs.
Part4: Accessories anti-rust small move stairs durable depends on it
When the steel-wood staircase was installed, although the engineers had connected them tightly, the rusting of the metal fittings was the most troublesome problem. Less affects the appearance, and heavy may cause serious problems such as collapse of the stairs! Therefore, more attention must be paid.
The wooden stairs also have some metal fittings, which are difficult to avoid. Metal fittings usually play an important role in the reinforcement of the stairs, so if the rusting of the metal fittings must be resolved in time, serious structural problems will occur.
Response: white vinegar wiped clean with water
Since rust is an oxide of a metal, it can react with an acid and is substantially soluble in an acid. Therefore, metal rust can generally be wiped with household white vinegar with water, but note that the acidity should not be too strong, otherwise it will corrode the metal and affect the structure of the metal fitting itself.
Maintenance tips: moisture is the most important
The best way to reduce the rust of metal fittings is to keep the steel-wood stairs from moisture. The various parts of the steel-wood staircase are closely linked to the whole. "To take one shot and move the whole body", so in order to avoid the rust of metal fittings, it is necessary to do measures to prevent the stairs from moisture.
There are also wooden materials on the metal stairs. The metal will rust when it is wet. Therefore, it is best not to wash it with plenty of water when cleaning. It is recommended to use a cleaning agent to spray on the surface of the stairs and then wipe it with a soft cloth.
Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate. By contrast, quicklime specifically applies to the single chemical compound calcium oxide. Calcium oxide that survives processing without reacting in building products such as cement is called free lime.
Calcium Oxide,Anhydrous Calcium Oxide,Lime Calcium Oxide,Calcined Calcium Oxide
Weifang Xinchang Chemical Co.,Ltd , http://www.xinchangchem.com