Ten steps to buy a cupboard

Cabinets of different styles in the cupboard store have a tendency of “squandering flowers for attractive eyes”. Many products that look very similar have a lot of prices. In fact, although the appearances are not the same, different cabinets look similar in style and have the same color, but there is a big difference in the quality of the cabinets. In addition to the selection of cabinets, there are also major differences in the quality of cabinets hand-manufactured by professional manufacturers using automated mechanized production lines and hand-workshop-style small factories. As ordinary consumers choose to buy cabinets to see more and more.

A look at the edge of the plate: the edge of the high-quality cabinet is delicate, smooth, feel good, the seal line is straight and smooth, and the joint is fine. Professional manufacturers use a straight edge banding machine to complete the edge sealing, decapitation, trimming, chamfering, polishing and other processes at a time. The adhesive coating is uniform, the pressing pressure of the sealing edge is stable, and the precision of the processing size can be adjusted to the most suitable part. The most accurate size. The workshop-style small factory uses a brush coating, manual pressure sealing edge, with a guillotine knife trimming, polishing with a manual polishing machine, due to uneven pressure, many places are not strong, but also cause formaldehyde and other toxic gases to evaporate in the air.

Second, see the punch: Nowadays the panel furniture is assembled by three-in-one connector, which requires a lot of positioning holes in the plate. The fit and accuracy of the hole position will affect the structural integrity of the cabinet cabinet. Professional manufacturers use multiple rows of drills to complete a number of holes on a board edge and board surface at a time. These holes are all a positioning reference, and the dimensional accuracy is guaranteed. Handwork small factories use row drills, or even pistol drill holes, the larger the size error.

Third, look at the cutting board: cutting board is also called the opening of the board, is the first process of cabinet production. Large-scale specialized enterprises use electronic cutting saws to input the processing dimensions through the computer. The size accuracy of the materials is controlled by the computer, and several sheets can be processed at one time. The performance of the equipment is stable, the precision of the size of the outboard board is very high, and the unit of the tolerance is in micrometers. And there is no collapse on the edges. Hand-manufactured small factories use small manual cutting saws with large dimensional errors and often collapse.

Four look at the door: The door is the face of the cabinet, as important as the person's face. The door panels produced by small factories are prone to moisture deformation due to improper handling of substrates and surface processes.

Five door hinges: Use proper gravity to press the door panel to see if it is detached or deformed. Repeatedly switch it to see if the door hinge is loose. To facilitate cleaning, it should be easy to disassemble and fix. The screw must be fixed and durable.

Look at the drawer six: Repeatedly switch to see if the drawer slide is smooth, good pull is better.

Seven look at the drawer slide: Although it is a small detail, it is an important part of the quality of the cabinet. Due to the size error of the hole position and the plate, an error occurs in the installation size of the slide rail, which causes the drawer to be pulled unsmoothly or left and right to loosen. It is also necessary to pay attention to whether the drawer gap is even.

Look at the handle: Look at the electroplated handle for flaws.

Nine-looking countertops: The desk plate is smooth and smooth, with no obvious joints at the mouth of the machine.

10 smell smell: open the cabinet door, smell whether there is a pungent odor, the material is environmentally friendly, and asked what kind of material sample cards, what grade.

Cabinets buy and close door prices furniture formaldehyde plate furniture cupboard door cabinet cupboard door drawer cabinet

Plant same with our body, which is not only need N P K,but also need some trace elements.  These Trace Element has been playing a very important role. We can supply every sigle trace element like EDTA-Cu, EDTA-Fe, EDTA-Mn, EDTA-Zn , Boron, Mo and so on. They can adjust the metabolism of plant. Different crops have different reqquirements about trace elemnt. Farmers need to learn how to control the content.

Trace Element

Trace Element,EDTA-Cu,EDTA-Fe,EDTA-Mn,EDTA-Zn

Hebei Monband Water Soluble Fertilizer Co., Ltd. , http://www.wsfertilizer.com