How to decorate the house?

There are many ways to decorate the house, so we have to understand first, the house decoration is more troublesome, because there are more places to consider, the house decoration method will be different, so we will Know in advance, then how to decorate the house? What are the precautions for house decoration? If you want to understand the next step, let me introduce you to the small series of decoration techniques.


房子怎么装修


First, how to decorate the house


1. According to the decoration budget, determine the way of decoration, simple or hardcover, and then determine the style of soft packaging, can be used in the form of a half-pack, which not only saves money, but also guarantees the design. Please design the company design, but the materials are purchased by yourself, paying only the cost of the workers and the design fee. Before starting construction, we must prepare all aspects, including procurement of materials, design plans, inquiry and budget, etc. The more prepared, the shorter the time, and the lower the labor cost.


2. In terms of wood lacquer, it is recommended that you use water-based lacquer, which is safe, environmentally friendly, and not yellow. It is currently the world's highest environmental protection product, such as Dufang, Lubo, Ketian, Jiabaoli and so on. Polyester lacquers are highly toxic, environmentally friendly, and yellowish, failing to meet EU environmental standards, and can be said to have reached the end. In this regard, you can enter "Decorative Pollution" and "EU Decorative Coatings Guidelines 2007-2010" on Baidu to find out


3. In the design and decoration of the house, the small-sized family should try not to use complicated decoration. Because the house is small, the accessories are less and more refined. The furnishings must be focused, orderly, and too many things, and people will feel confused. The windows do not need to be decorated, and the color of the curtains should be coordinated with the decoration of the entire room. If the bedroom is small, it is best not to use large curtains. Use the same wallpaper in the kitchen, bedroom and foyer to make the room look big.


房子怎么装修


Second, the house decoration matters needing attention


1. In the design and decoration of the house, the small-sized family should try not to use complicated decoration. Because the house is small, the accessories are less and more refined. The furnishings must be focused, orderly, and too many things, and people will feel confused. The windows do not need to be decorated, and the color of the curtains should be coordinated with the decoration of the entire room. If the bedroom is small, it is best not to use large curtains. Use the same wallpaper in the kitchen, bedroom and foyer to make the room look big.


2. People demand the overall beauty and comfort of the decoration, which requires the home decoration to be realized in a design that is very suitable for people's wishes without losing the style of the times. Therefore, the design of the house decoration has a guiding position. Having a good designer will give your room a satisfactory result, and you can save on renovation costs while maintaining quality.


3. The balcony is equipped with a laundry pool. When we are decorating the house, it is best to have a laundry pool on the balcony of the house. Installing a laundry pool will be of great help to our future life. Generally, we will put some clothes that are not very important, or clothes that are not close to the washing machine. But some of our close-fitting clothes are still washed in the laundry pool. If we don't have a laundry pool on the balcony, then I have to wash in the bathroom.


There are different styles of house decoration, so we must first understand before the decoration, then what are the precautions for how to decorate and decorate the house? I believe that through the introduction of the above small series, everyone knows about these, then if everyone For more information on decoration, please continue to pay attention to the decoration home Internet cafe.


More related wonderful reading:

How to decorate the old house?

How to decorate the house and how to decorate the house

How to decorate a house without a balcony

How to decorate old houses and what are the renovation steps?

How to decorate a rectangular house? What are the precautions?

How to decorate the house to look good? And save money?


Die components

The main components for die In a hole toolsets are:

  • Die block – This is the main part that all the other parts are attached to.
  • Punch plate – This part holds and supports the different punches in place.
  • Blank punch – This part along with the blank die produces the blanked part.
  • Pierce punch – This part along with the pierce die removes parts from the blanked finished part.
  • Stripper plate – This is used to hold the material down on the blank/pierce die and strip the material off the punches.
  • Pilot – This will help to place the sheet accurately for the next stage of operation.
  • Guide, back gauge, or finger stop – These parts are all used to make sure that the material being worked on always goes in the same position, within the die, as the last one.
  • Setting (stop) block – This part is used to control the depth that the punch goes into the die.
  • Blanking dies in a hole – See blanking punch
  • Pierce die in a hole– See pierce punch.
  • Shank – used to hold in the presses. it should be aligned and situated at the center of gravity of the plate.
  • The most important component of the automobile mold is the cover mold. This type of die is mainly a cold die. "Automobile mold" in a broad sense is the general term for the molds used to make all the parts on the car. For example, stamping molds, injection molds, forging molds, casting wax molds, glass molds, etc.
    The stamping parts on the car body are roughly divided into cover parts, beam parts and general stamping parts. The stampings that can clearly characterize the image of the car are car covers. Therefore, a more specific car mold can be said to be "a stamping mold for automobile cover parts". Referred to as the automobile cover die. For example, the trimming die for the outer panel of the front door, the punching die for the inner panel of the front door, etc.
    Of course, not only the body of the car has stamping parts. The molds of all stamping parts on automobiles are called "auto stamping dies". The summary is:
    1. Automobile mold is the general term for the molds that make all the parts on the car.
    2. Auto stamping die is a die for stamping all stamping parts on the car.
    3. The automobile body stamping die is a die for stamping all stamping parts on the automobile body.
    4. The stamping die for automobile cover parts is a die for punching all the cover parts on the car body.

Components For Automobile Dies

Ball Sleeve,Auto Mold Parts,Custom Wear Plate,Cam Bottom Guide Plate

Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com